Blast report
Function Name:
The function is only included to maintain legacy macros. It has been superseded by Blasting Report.
If a design area has already been selected, you will be prompted for the names of the current drive and stope outlines with the CURRENT POSITION INFORMATION form.
Stope
The name of the current stope outline.
Drive
The name of the current drive outline.
If no drive has been selected, or the CURRENT POSITION INFORMATION form was applied, the Blast Report function will display the RING NAME form.
Ring
The name (or number) of the ring
Complete the RING NAME form and choose Apply to continue or choose Cancel to cancel the function. Applying the form displays the BLASTING REPORT form.
Pos
The report column in which to display the hole attribute value.
Attribute
The hole attribute to report. Possible values are:
| number | The hole number. |
| letter | The hole letter corresponding to the hole number. For example, 1 = A, 2 = B, ... 27 = AA, 28 = AB ... |
| hole length | The length of the hole. |
| top of charge | The depth of the top of charge from the hole collar. |
| bottom of charge | The depth of the bottom of charge from the hole collar. |
| charged length | The length of the charged segment. |
| explosive name | The name of the explosive used to charge the hole. |
| explosive mass | The mass of explosive in the hole. |
| sequence number | The sequence number of the hole (that is, the detonator number of the hole). |
| delay | The detonator delay for the hole. |
| pipe | The '|' character - may be used to separate columns of data. |
| drive | The name of the drive from which the hole was drilled. |
| stope | The name of the stope used for drilling the hole. |
Title
The title to print at the top of the report column for this attribute.
Width
The width of the column (in characters) for the attribute.
Dec. Places
The number of decimal places to display for the attribute (if appropriate).
An example report is shown below:
Ring Design blasting report: Date.: 01-Apr-96 Ring.: 1 -------------------------------------------------------------------------- | hole: length | charge: top end length | det # delay stope drive | -------------------------------------------------------------------------- | 2 B 10.22 | 1.00 10.22 9.22 | 5 5.00 E-W A E-W 1 | | 3 C 12.10 | 2.99 12.10 9.11 | 4 2.00 E-W A E-W 1 | | 4 D 13.61 | 1.00 13.61 12.61 | 3 1.50 E-W A E-W 1 | | 5 E 13.97 | 3.09 13.97 10.88 | 2 1.00 E-W A E-W 1 | | 6 F 14.44 | 1.00 14.44 13.44 | 1 0.50 E-W A E-W 1 | | 7 G 14.73 | 3.11 14.73 11.63 | 0 0.00 E-W A E-W 1 | | 8 H 15.15 | 1.00 15.15 14.15 | 1 0.50 E-W A E-W 1 | | 9 I 15.37 | 3.04 15.37 12.33 | 2 1.00 E-W A E-W 1 | | 10 J 14.69 | 1.00 14.68 13.68 | 3 1.50 E-W A E-W 1 | | 11 K 13.59 | 2.88 13.59 10.71 | 4 2.00 E-W A E-W 1 | -------------------------------------------------------------------------- |
This function requires an existing hole
No holes have been drilled for the current ring, so a report will not be created.
An error occurred attempting to write filename
An error occurred while writing the report. The disk may be full, or you may not have write permission to the specified file.