Eclipse-Husky data recorder

Function Name:

• ECLIPSE HUSKY

The data format for the Eclipse Husky data recorder is described here. Click here for details on the processing of data recorder files.

From the Survey menu, select Data recorders, then Eclipse-Husky to invoke the function.

Features NOT SUPPORTED by the ECLIPSE-HUSKY data recorder include:

• Down load and upload functions
• Date values are not obtained from the data recorder
• Time values are not obtained from the data recorder
• Temperature values are not obtained from the data recorder
• Pressure values are not obtained from the data recorder
• Co-ordinate values are not obtained from the data recorder

Above is an example of the ECLIPSE-HUSKY data format. This output is produced by HUSKY HUNTER data recorders running the latest version of the ECLIPSE data recording software.

Surpac only uses 4 of the ECLIPSE record types as described below.

Columns	Description
5 and 6	Contains a 2 digit code which defines the how the remainder of data in the record is interpreted. Supported codes are: 00. The record represents the start of a new survey. No other data is used from this record 11. The record contains the name of the reference station 31. The record contains the Setup station and height of instrument 01. The record contains point observation data

Record type	Columns	Description
11	7 to 13	The reference station name occupies these columns, left justified
31	7 to 13	The setup station name occupies these columns, left justified.
31	14 to 19	The height of instrument, in millimetres.
01	7 to 10	The point number occupies these columns.
01	11 to 17	The slope distance in millimetres
01	18 to 24	The horizontal angle in the format DDDMMSS
01	25 to 31	The vertical angle in the format DDDMMSS
01	32 to 36	The height of target in millimetres
01	42 to 44	The string number