Move mast from wall
This function allows you to move the mast the specified distance from the specified wall.
To run this function: Choose Design > Ring design > Move mast > From wall, or...
Distance
Enter the distance to move the mast from the specified wall.
Wall
The wall to reference the distance from. Select 'right' to move the mast a specified distance from the right wall or 'left' to move the mast a specified distance from the left wall.
If the new mast location is still within the survey opening and the pivot point is within the specified limits, the mast be moved to the specified distance from the specified wall, otherwise it will remain where it is and a warning will be displayed in the message window.
The New Rig position would be located outside the Survey Opening
Warning message indicating that the mast cannot be moved to the specified coordinates and remain in the survey opening.
The new rig position would place the pivot point outside the reach of the rig
Warning message indicating that the mast cannot be moved to the specified coordinates as the pivot would be below the minimum height, above the maximum height or outside the lateral limits specified for the rig.