Single hole
You can use this command to create a single blasthole.
To run this function: Design > Blast Design > Blast Design > Create single holes, or...
Fields on the Single hole parameters form
| Field | Description |
|---|---|
| Collar Elevation | |
| Elevation Method | The method for determining collar elevation. Options are: Fixed, Selected Point, DTM layer, DTM file. |
| Elevation | The collar elevation. This field appears if the elevation method is Fixed. |
| Toe Elevation | |
| Toe Position Method | The toe position method. Options are: Set Length, Set Elevation, DTM layer, DTM file, Set to Segment, Selected Point. |
| Hole Length | The length of all holes. This field appears if the toe position method is Set Length. |
| Subdrill distance | The extra hole length that will be added to the specified hole length. |
| Hole Settings | |
| Hole Bearing | The bearing of the hole. |
| Hole Dip | The dip of the hole. |
| Hole Diameter | The diameter of the hole. |
| Blast Settings | |
| Rock name |
Select one of the rocks from the pre-defined list. The list of rock types is defined in drill and blast settings. |
| Pattern Identifier | The pattern identifier for the holes. |
| Drill Rig | The drill rig name. |
| Labelling Options | |
| Hole ID Prefix | The hole prefix string. This is added to the hole ID before incrementing the numerical part. |
| Hole ID Suffix | The hole suffix string. This is added to the hole ID after incrementing the numerical part. |
| Starting Value | The starting value for the incremental part of the hole ID. |
| Pad Hole_Id |
|
| Pad Length | The length to pad the hole ID to. |
| Pad Character | The character with which to pad the hole ID. |
Output
Single holes with specified settings are graphically created by mouse clicks.
Messages